1" x 150' High Intensity Reflective Tape - Type 3

1 inch wide Nikkalite High Intensity Type 3 Reflective Tape
Click To Enlarge
  • Manufacturer: Nikkalite
  * Marked fields are required.
Price $79.99

1" x 150' rolls. For ultimate night time visibility, use our self adhesive 1 inch High Intensity Type III tape. This material reflects at 250 candelas or 3 times brighter than standard engineer grade reflective tape.  Exceeds ASTM D4956 Type 3 Requirements.  We carry White, Yellow, Orange, Green, Blue and Red in 150 foot rolls.

You will find this tape used on road signs, highway barrels, traffic cones, roadside guard rails and in other places where brighter tape is needed. It can be used virtually anywhere. Our High Intensity Grade Reflective tape exceeds all federal and state requirements and is outdoor rated at 10 years. It is easy to apply. Simply cut off the amount you need, peel the backing off the tape and apply to a smooth, clean surface. This tape will bend around curves but does not stretch like our flexible engineer grade tape.  

The picture below shows the colors we carry.  The top half is in standard light and the bottom half of the picture is taken with a flash. The colors from left to right are white, orange, blue, yellow, green, and red.

Click here for more pictures of this product.

Click here for a spec sheet on our high intensity reflective tape.

Our 1" x 150 foot rolls run $79.99 plus shipping. We carry White, Orange, Blue, Yellow, Green and Red.

Related Items