ROLLS 6" Chevron Striping Tape (Reflective) - NFPA 1901 1917

We carry 6 different types of 6" wide chevron striping.  

Type 1 Flexible Engineer Grade, Type 3 High Intensity Grade, Reflexite V92/97 Daybright, Reflexite V98 Conformable Prismatic - (most popular), Reflexite V82 Type 5 and Nikkalite Type 8 CRG.

 (Note - We have starter triangles for making chevrons with V98) You can click here to see our chevron striping photo gallery.


National Fire Protection Agency Guidelines (NFPA 1901 1917) recommend the following guidelines for fire trucks and emergency vehicles - 

REFLECTIVE REQUIREMENTS FOR THE SIDES OF THE VEHICLE & DOORS 

Doors designed to allow persons to enter or exit the apparatus shall have at least 96 in.2 (square) (62,000 mm2) of retroreflective material affixed to the inside of the door. 

A reflective stripe(s) shall be affixed to at least 50 percent of the cab and body length on each side, excluding the pump panel areas, and at least 25 percent of the width of the front of the apparatus. 

The stripe or combination of stripes shall be a minimum of 4 in. (100 mm) in total width. 

A graphic design shall be permitted to replace all or part of the required striping material if the design or combination thereof covers at least the same perimeter length(s) required by 15.9.3.1. 

REFLECTIVE REQUIREMENTS FOR THE BACK OF THE VEHICLE 

At least 50 percent of the rear-facing vertical surfaces, visible from the rear of the apparatus, excluding any pump panel areas not covered by a door, shall be equipped with retroreflective striping in a chevron pattern sloping downward and away from the centerline of the vehicle at an angle of 45 degrees. 

Each stripe in the chevron shall be a 6" wide single color alternating between red and yellow.  

All retroreflective materials to be ASTM D 4956 for Type I Sheeting or better. 

REFLECTIVE REQUIREMENTS FOR OTHER PARTS OF THE VEHICLE 

Where the design of the aerial device incorporates a knuckle, the knuckle shall be as follows: (1) Equipped with position lights or continuously illuminated by boom lights (2) Painted with reflective paint or provided with retroreflective Striping 

All stabilizers that protrude beyond the body of the apparatus shall be striped or painted with retroreflective material so as to indicate a hazard or obstruction.


  Each product page below will have its own spec sheet link.

1 - 11 of 11 items
Sort By:

6" x 30' - Type 1 Flexible Engineer Grade Chevron Striping

6" x 30' - Type 1 Flexible Engineer Grade Chevron Striping

6" x 30' (30 foot) roll of Type 1 Flexible Engineer Grade Chevron Striping. This is an NFPA compliant material (type 1) and the most economical way to stripe fire trucks and emergency vehicles. This material is about as reflective as a car tag.

  • Price: $79.99

6" x 150' - Type 1 Flexible Engineer Grade Chevron Striping

6" x 150' - Type 1 Flexible Engineer Grade Chevron Striping

6" x 150' (150 foot) roll of Type 1 Flexible Engineer Grade Chevron Striping. This is an NFPA compliant material (type 1) and the most economical way to stripe fire trucks and emergency vehicles. This material is about as reflective as a car tag.

  • Price: $169.99

6" x 30' - Type 3 High Intensity Grade Chevron Striping

6" x 30' - Type 3 High Intensity Grade Chevron Striping

6" x 30' (30 foot) roll of Type 3 High Intensity Grade Chevron Striping. This is an NFPA compliant material (type 3). Triple the brightness of engineer grade film.

  • Price: $89.99

6" x 150' - Type 3 High Intensity Grade Chevron Striping

6" x 150' - Type 3 High Intensity Grade Chevron Striping

6" x 150' (150 foot) roll of Type 3 High Intensity Grade Chevron Striping. This is an NFPA compliant material (type 3). Triple the brightness of engineer grade film.

  • Price: $239.99

6" x 30' - Reflexite V98 Conformable Prismatic Chevron Striping

6" x 30' - Reflexite V98 Conformable Prismatic Chevron Striping

6" x 30' (30 foot) roll of Reflexite V98 Conformable Prismatic Chevron Striping. Red and Fluorescent Lime. This is our most popular chevron striping material. Conformable, repositionable during installation and incredibly bright. It is the...

  • Price: $119.99

6" x 150' - Reflexite V98 Conformable Prismatic Chevron Striping

6" x 150' - Reflexite V98 Conformable Prismatic Chevron Striping

6" x 150' (150 foot) roll of Reflexite V98 Conformable Prismatic Chevron Striping. Red and Fluorescent Lime. This is our "most popular" chevron striping material. Conformable, repositionable during installation and incredibly bright. It is the...

  • Price: $419.99

6" x 30' - Reflexite V82 Type 5 Prismatic Chevron Striping

6" x 30' - Reflexite V82 Type 5 Prismatic Chevron Striping

6" x 30' (30 foot) rolls of Red and Yellow Reflexite V82 Type 5 Prismatic Chevron Striping. Type V microprismatic retroreflective sheeting. This is the brightest class of tape in the Reflexite line. Designed for rugged outdoor use on vehicles..

  • Price: $119.99

6" x 150' - Reflexite V82 Type 5 Prismatic Chevron Striping

6" x 150' - Reflexite V82 Type 5 Prismatic Chevron Striping

6" x 150' (150 foot) rolls of Red and Yellow Reflexite V82 Type 5 Prismatic Chevron Striping. Type V microprismatic retroreflective sheeting. This is the brightest class of tape in the Reflexite line. Designed for rugged outdoor use on vehicles..

  • Price: $429.99

6" x 30' - Type 8 Crystal (Diamond) Grade Chevron Striping

6" x 30' - Type 8 Crystal (Diamond) Grade Chevron Striping

6" x 30' (30 foot) roll of Type 8 Crystal Grade Chevron Striping. Our brightest tape. NFPA compliant material. Over 10 times the brightness of engineer grade film.

  • Price: $129.99

6" x 150' - Type 8 Crystal (Diamond) Grade Chevron Striping

6" x 150' - Type 8 Crystal (Diamond) Grade Chevron Striping

6" x 150' (150 foot) roll of Type 8 Crystal Grade Chevron Striping. Our brightest tape. NFPA compliant material. Over 10 times the brightness of engineer grade film.

  • Price: $499.99

Chevron Seam Sealing Tape - Clear (1/2" x 75')

Chevron Seam Sealing Tape - Clear (1/2" x 75')

Quantity 1 = 1 roll of 1/2" x 75 foot Clear Chevron Seam Tape - $10 Our Oracal Clear Chevron Seam Tape can be used to seal the seam between two chevron panels or to seal the edge of a panel. This protects the edges of your panel and prevents...

  • Price: $10.00