3" x 150' - Reflexite Rail Gate Arm Tape (RGA)
3" x 150' (150 foot) Rail Gate Arm Tape Rolls. Specifically designed to mark gates, automatic gate arms, railroad crossing arms, draw bridge arms and all other gate type devices. MUTCD Compliant. Our Reflexite Rail Gate Arm Prismatic Retroreflective Tape is a Type V prismatic reflective tape.
This tape exceeds the requirements of the US DOT FHWA Manual on Uniform Traffic Control Devices (MUTCD) - 2009 Edition per Section 8C.04 Paragraph 05 stating "Gate arms shall be fully retroreflectorized on both sides and shall have vertical stripes alternatively red and white at 16-inch intervals measured horizontally". (more info at this link)
Reflexite gate arm tape is prismatic meaning that it uses micro prisms to collect light and return it back to the source which is normally a cars headlights. This is an extremely bright tape and can be seen from well over a thousand feet away. The RGA tape is rated for a 10 year outdoor life. Like all Reflexite tapes, RGA gate tape has a very aggressive adhesive and sticks well to any smooth, clean surface.
Our 3" x 150' Rolls of RGA tape run $200 per roll.